COMMAND DETAILS
29
Example *SRE?
48
Returns settings of the
Service Request Enable
Register. Here ESB and
MAV are returned.
*STB?
Status Command
Description
Reads the Status Query Byte Register. The *STB?
command does not clear the register.
If the Master Summary Status bit (MSS) is set, it
indicates that there is a reason for a service
request.
Query Syntax *STB
Return Parameter <NRf> Bit(s) Set <NRf> Bit(s) Set
4 CSUM 32 ESB
8 QUES 64 MSS
16 MAV
Query Example *STB?
36
Returns status of a byte
query in the Status Byte
Register. Here CSUM
and ESB are returned.
*TRG
Status Command
Description
Trigger command. This command mimics GET
(Group Execute Trigger) as defined in IEEE 488.1.
Syntax *TRG
Example *TRG
PEL-2000 Programming Manual
30
Abort Subsystem
:ABORt ......................................................................... 30
:ABORt
All
Channel Command
Description
Turns all electronic loads to OFF.
Syntax :ABORt
Example :ABORt
To Next Page
Loading...
