GW Instek PEL-2002 - LOAD Subsystem; Load:[State]; Load:short:[State]

COMMAND DETAILS
67
Parameter <aard>
CH1,CH2,CH3,CH4,CH5,
CH6,CH7,CH8
Returns all the power
values from all the
channels, 1-8(PEL-
2004)/1-4(PEL-2002).
Query Example :FETC:ALLP?
0.0000, 0.0000, 10.200,
5.5000
Channels 1 to 2 have no
power. Channels 3 & 4
have 10.2 and 5.5 watts,
respectively.
PEL-2000 Programming Manual
68
LOAD Subsystem
:LOAD:[STATe] ............................................................. 68
:LOAD:SHORt:[STATe] ................................................ 68
:LOAD:SHORt:KEY ...................................................... 69
:LOAD:PROTection? .................................................... 70
:LOAD:PROTection:CLEar ........................................... 70
:LOAD:TIME? ............................................................... 70
:LOAD:[STATe]
Channel
Specific Command
Description
This command turns the electronic load on/off for
the specific channel.
Syntax :LOAD:[STATe] [ON/1, OFF/0]
Parameter ON/1, OFF/0 Load module
ON/1 Load On
OFF/0 Load Off
Example :LOAD ON
Turns the specific
channel load on.
Query Syntax :LOAD:[STATe]?
Return Parameter <NR1> Load module
1 Load is On
0 Load is Off
Query Example :LOAD?
Turns the specific
channel load on.
:LOAD:SHORt:[STATe]
Channel Specific
Command
Description
This command shorts the electronic load on/off for
the specific channel.
Syntax :LOAD:SHORt:[STATe] [ON/1, OFF/0]