GW Instek PEL-2002 - Utility Subsystem; Utility:auto:load; Utility:auto:mode; Utility:sound

COMMAND DETAILS
45
Utility Subsystem
:UTILITY:AUTO:LOAD ................................................ 45
:UTILITY:AUTO:MODE .............................................. 46
:UTILITY:SOUNd ........................................................ 46
:UTILITY:REMote ........................................................ 47
:UTILITY:REMote:MODE ........................................... 47
:UTILITY:TIME ............................................................ 48
:UTILITY:LOAD ........................................................... 48
:UTILITY:AUTO:LOAD
System Command
Description
Sets the mainframe to auto mode. Upon startup the
mainframe will turn loads/programs on.
Syntax :UTILITY:AUTO:LOAD OFF/0, ON/1
Parameter OFF/0, ON/1 Auto load
OFF/0 Turns auto loading off
ON/1 Turns auto loading on
Example :UTILITY:AUTO:LOAD 1
Turns auto loading on
Query Syntax :UTILITY:AUTO:LOAD?
Return Parameter <NR1> Auto load status
0 Auto loading is off
1 Auto loading is on
Query Example :UTILITY:AUTO:LOAD?
1
The main frame is
currently configured
to auto load.
PEL-2000 Programming Manual
46
:UTILITY:AUTO:MODE
System Command
Description
Sets the mainframe auto mode as load or program.
Upon startup the mainframe can automatically
turn on loads or automatically run the last
program.
Syntax :UTILITY:AUTO:MODE PROGRAM/0, LOAD/1
Parameter PROGRAM/0, LOAD/1
PROGRAM/0 Sets the auto load mode to
program
LOAD/1 Sets the auto load mode to
load.
Example :UTILITY:AUTO:MODE 1
Auto load mode is set to
load.
Query Syntax :UTILITY:AUTO:MODE?
Return Parameter <NR1> Auto load mode
0 Program
1 Load
Query Example :UTILITY:AUTO:MODE?
0
Auto load mode is set to
Program.
:UTILITY:SOUNd
System Command
Description
Turns the sound on/off for the mainframe/load
modules.
Syntax :UTILITY:SOUNd OFF/0, ON/1
Parameter OFF/0, ON/1
OFF/0 Turns sound off
ON/1 Turns sound on
Example :UTILITY:SOUN 1
Turns sound on.
Query Syntax :UTILITY:SOUNd?