GW Instek PEL-2002 - Voltage Subsystem; Voltage:avalue;Bvalue; Voltage:current

COMMAND DETAILS
113
Voltage Subsystem
:VOLTage:L1/L2 ........................................................ 113
:VOLTage:AVALue/BVALue ...................................... 114
:VOLTage:CURRent .................................................. 115
:VOLTage:MODE ...................................................... 116
:VOLTage:L1/L2
Channel Specific
Command
Description
Sets the voltage of A Value or B Value in CV mode,
where L1 is A Value and L2 is B Value.
Syntax :VOLTage:L1/L2 <NRf+>[V]
Parameter <NRf+>[V] Voltage
10 10 volts
10V 10 volts
MIN Sets the voltage to the
minimum value for the
channel
MAX Sets the voltage to the
maximum value for the
channel
Example :VOLT:L1 10V
Sets A Value to 10 volts
for the specific channel
:VOLT:L2 MAX
Sets B Value to the
maximum allowed
voltage for the specific
channel.
Query Syntax :VOLTage:L1/L2?
Return Parameter <NR2> 1 unit = 1 volt Voltage
10 Returns the voltage of the
specific channel.
PEL-2000 Programming Manual
114
Query Example :VOLT:L1?
5
:VOLT:L1? MAX
81.6000
A Value is set to 5 volts.
Returns the maximum
settable voltage.
:VOLTage:AVALue/BVALue
Channel Specific
Command
Description
Sets the voltage of A Value or B Value in CV mode.
Syntax :VOLTage:AVALue/BVALue <NRf+>[V]
Parameter <NRf+>[V] Voltage
10 10 volts
10V 10 volts
MIN Sets the voltage to the
minimum value for the
channel
MAX Sets the voltage to the
maximum value for the
channel
Example :VOLT:AVAL 10V
Sets A Value to 10 volts
for the specific channel
:VOLT:BVAL MAX
Sets B Value to the
maximum allowed
voltage for the specific
channel. (single channel
only)
Query Syntax :VOLTage:AVALue/BVALue?
Return Parameter <NR2> 1 unit = 1 volt Voltage
10 Returns the voltage of the
specific channel.