GW Instek PEL-2002 - Status:csummary:event; Status:questionable:condition; Status:questionable:enable; Status:questionable[:Event]

COMMAND DETAILS
109
Query Example :STAT:CSUM:ENAB?
4
Only the events from
channel 3 can set the
CSUM bit in the Status
Byte Register.
:STATus:CSUMmary:EVENt?
Channel Specific
Command
Description
Returns the status of the Channel Summary Event
register. The Channel Summary Event register is
cleared upon reading.
Query Syntax :STATus:CSUMmary:EVENt? <NR1>
Return Parameter <NR1> Event <NR1> Event
1 CH1 16 CH5
2 CH2 32 CH6
4 CH3 64 CH7
8 CH4 128 CH8
Query Example :STAT:CSUM:EVEN?
4
An event from channel 3
occurred since the last
time the Channel
Summary Event register
was read.
:STATus:QUEStionable:CONDition?
Channel Specific
Command
Description
Returns the status of the Questionable Status
Condition register for the specific channel. See
page 135 for details.
Query Syntax :STATus:QUEStionable:CONDition? <NR1>
Return Parameter <NR1> Condition <NR1> Condition
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not used
PEL-2000 Programming Manual
110
Query Example :STAT:QUES:COND?
2
OV (overvoltage) error.
:STATus:QUEStionable:ENABle
Channel Specific
Command
Description
Sets which events are enabled in the Questionable
Status Enable register. The mask values are the bit
weights of the events. See page 135 for details.
Syntax :STATus:QUEStionable:ENABle <NR1>
Parameter <NR1> Event <NR1> Event
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not used
Example :STAT:QUES:ENAB 12
Events OP (Bit 3) and RV
(Bit 4) are enabled in the
Questionable Status
Enable register.
Query Syntax :STATus:QUEStionable:ENABle? <NR1>
Return Parameter
<NR1> Event <NR1> Event
1 OC 16 OT
2 OV 32 G/N
4 OP 64 UVP
8 RV 128~65535 Not used
Query Example :STAT:QUES:ENAB?
4
The OP event is enabled.
:STATus:QUEStionable[:EVENt]?
Channel Specific
Command
Description
Returns the status of the Questionable Status Event
register. The Questionable Status Event register is
cleared upon reading.