GW Instek PEL-2002 - Page 60

COMMAND DETAILS
119
:MEMory:SAVE:ALLPreset
All Channels
Description
Saves preset data to internal memory for all
channels.
Syntax :MEMory:SAVE:ALLPreset: <NR1>
Parameter <NR1> Preset no.
0~9 P0~P9
Example :MEM:SAVE:ALLP 0
Saves the preset settings
to (P0) for all channels.
:MEMory:SAVE:SETup
All Channels
Description
Saves setup data for all channels to internal
memory slots S1~S4.
Syntax :MEMory:SAVE:SETup: <NR1>
Parameter <NR1> Setup data
1~4 S1~S4
Example :MEM:SAVE:SET 1
Saves the setup data to
S1 (applicable to all
channels).
:MEMory:RECall:PREset
Channel Specific
Command
Description
Recalls preset data for the specific channel from
internal memory slots P0~P9.
Syntax :MEMory:RECall:PREset: <NR1>
Parameter <NR1> Preset no.
0~9 P0~P9
Example :MEM:REC:PRE 0
Recalls the preset
settings from (P0).
PEL-2000 Programming Manual
120
:MEMory:RECall:PROGram
Channel Specific
Command
Description
Recalls memory data to the current channel.
Syntax :MEMory:RECall:PROGram <NR1>
Parameter <NR1> Memory number
001~120 M001~M120
Example :MEM:REC:PROG 100
Recalls the memory
M100 for the current
channel.
:MEMory:RECall:ALLPreset
All Channels
Description
Recalls preset data from internal memory for all
channels.
Syntax :MEMory:RECall:ALLPreset: <NR1>
Parameter <NR1> Preset no.
0~9 P0~P9
Example :MEM:REC:ALLP 0
Recalls the preset
settings from (P0) for all
channels.
:MEMory:RECall:SETup
All Channels
Description
Recalls setup data for all channels from internal
memory slots S1~S4.
Syntax :MEMory:RECall:SETup: <NR1>
Parameter <NR1> Setup data
1~4 S1~S4