Hasselblad X1D II 50C - Firmware Update

X1D II 50C USER GUIDE www.hasselblad.com
123
SETTINGS
Contents
FIRMWARE UPDATE
MAIN MENU > GENERAL SETTINGS >
SERVICE > CHECK FOR UPDATE
1 Press the Settings icon on the Touch
Display.
2 The General Settings Menu appears.
3 Press the Service Menu.
4 Press the Check for Update button.
5 The camera will now check the
inserted card/cards for update les.
Swipe right or press the Menu / EXIT
button to get back to the Main Menu.
Update X1D II Firmware Procedure
1 Download the latest X1D II Firmware
from www.hasselblad.com.
2 Save the Firmware le to an SD Card.
3 Insert the SD Card in the Camera.
4 Select Settings from the Main Menu.
5 Select Service / Firmware Update /
Check for Update.
6 Make sure the Firmware File Name
and Number corresponds to the latest
Firmware File you have downloaded.
7 Select Update.
8 Select Update in the Update Dialogue
to start the Firmware Update.
9 During the update the text "Update in
progress" is displayed on the Camera
Display.
10 Do not turn off the Camera during the
Update Progress.
11 The Update will take several minutes.
12 When the Update is nished this text
will be displayed: "Update Finished.
Please remove and reinsert battery!".
13 Remove and reinsert the battery.
14 Start the Camera.
15 The new Firmware is now installed!
Note!
A USB cable cannot be inserted when per-
forming the update. A warning message
will be shown if a cable is inserted.
Check for Update dialogue
No Firmware Update les are
available on the SD Card
Update Conrm dialogue
USB Warning dialogue
Service Menu