X1D II 50C USER GUIDE www.hasselblad.com
99
SETTINGS
Contents
Camera Settings Menu Focus Menu
5.3 CAMERA AUTOFOCUS SETTINGS
MAIN MENU > CAMERA SETTINGS >
FOCUS
1 Select the Camera icon on the Touch
Display.
2 The Camera Settings Menu appears.
3 Press the Focus Settings Menu
Swipe right or press the Menu / EXIT
button to get back to the Main Menu.
Autofocus
AF Point Size Settings
Select the size of the area used for
AF measurements. You can choose
between:
Large (35 points)
Medium (63 points)
Small (117 points)
Also see page 77 on how to resize.
Reset Focus Point Settings
Select any of these two settings:
- After Exposure
- Never.
Autofocus Point can be reset to
centre position after every exposure.
If you need the Autofocus Point to
remain in the specic position, select
Never.
See section Move Autofocus Point
on page 76 for more in-depth
information.
Scan Range Settings
For lenses that support this function
(e.g. the XCD 120 Macro or the
XCD 135) is used you can choose
between:
- Near
- Far
- Full
These settings will limit the focusing
scan range to scan in AF mode. If
Near or Far is selected, AF speed will
be faster.
Continued on the next page.
AF Point Size Setting
Reset Focus Point Setting
Scan Range Setting
Note!
You can program a Custom
Button to cycle through the
Scan Range options.