ATTACH THE LENS
Caution!
Be careful when you attach/detach the components to/from
the camera. This will help prevent damage to the data bus
connections.
Caution!
Do not insert ngers into the camera body. This can cause
damage to the equipment.
1 Push the lens removal button
(A)
and remove the protec-
tion cover
(B)
from the camera body.
2 Rotate the lens so that the red mark on the lens
(C)
lines up
with the red mark
(D)
on the camera body.
3 Mount the lens
(E)
into the camera body
(F)
and then turn
the lens clockwise to lock its position.
4 Make sure the lens is locked to the camera body before
using or moving the camera.
A
B
C
D
E
F
X1D II 50C USER GUIDE www.hasselblad.com
25
LENSES
Contents
To Next Page
Loading...
