1
AF/MF button
The AF/MF button toggles between Autofocus and Manual
Focus.
Can be reprogrammed as described on page 112.
2
ISO/WB button
This button provides direct access to the ISO and WB
settings. Press one time to change ISO settings. Press
again to change WB settings.
Can be reprogrammed as described on page 112.
3
Front Scroll Wheel
The front and Rear Scroll Wheels are used to make
changes in exposure settings, navigate the Touch Display
Menu as well as acting as browse controls.
4
Shutter Release Button
This button has two positions. Press half way (or soft) to
activate the camera, auto focus function and exposure
meter. Press all the way down (or more rm) to release the
shutter. The chosen exposure procedure and the self timer
are also activated with this button.
5
Mode Dial
Select any of the 10 programs. MQ, M, A, S, P , Full
Automatic mode, Video mode and 3 Custom modes C3,
C2 and C1.
6
ON / OFF button
Press the button for 1 second to turn on the camera.
The X1D II start up logo will appear and then the Control
Screen. After a few seconds (customizable) of inactivity the
camera will enter Display Off mode. A long press on the
button turns the camera off completely (even from Display
Off mode). A short press on the button toggles Touch
Display On and Off.
7
Rear Scroll Wheel
The scroll wheel is used to make changes in exposure
settings, to navigate the Camera menus as well as acting
as browse control.
Note!
Video mode will be implemented in a coming rmware
release.
Note!
Some of the buttons have multiple functions according to the
settings made.
Note!
Some of the buttons can be reprogrammed to a different
function. See page 112.
Note!
In addition to the release button, the X1D II camera can also
be remotely released using the X System Release Cable. See
page 63 and page 137.
4.2 GRIP BUTTONS AND CONTROLS
5
6
7
3
4
1
2
X1D II 50C USER GUIDE www.hasselblad.com
35
FUNCTIONS
Contents