X1D II 50C USER GUIDE www.hasselblad.com
137
ACCESSORIES
Contents
XPAN LENS ADAPTER
CP.HB.00000036.01
The XPan Lens Adapter is used to attach lenses that was made
for the XPan Camera. Available XPan lenses were 5,6/30mm,
4/45mm and 4/90mm.
Note!
XPan Lenses had no built-in shutter. Consequently, they can
only be used when the electronic shutter of the camera is
activated. See more on page 92.
Note!
You can use Focus Peaking or 100% zoom in to assist manual
focusing.
RELEASE CORD X
CP.HB.00000242.01
The Hasselblad Release Cord X allows for remote shutter
control, helping to eliminate shake or vibration. A durable
cloth-wrapped 90cm (36 in.) cable connects to the
microphone input of the X1D II and the simple single button
operation allows photographers to keep vibration to a
minimum. Its durable metal construction combined with its
slim, ergonomic design ts comfortably in the hand. Release
Cord X comes with a small leather carry pouch.
BATTERY CHARGING HUB
CP.HB.00000397.01 (EMEA)
CP.HB.00000395.01 (United Kingdom)
CP.HB.00000392.01 (North America/Japan)
CP.HB.00000396.01 (China)
CP.HB.00000393.01 (South Korea)
CP.HB.00000394.01 (Australia/New Zealand)
Streamlining the battery charging process, the Hasselblad
Battery Charging Hub contains dual slots that support the
simultaneous charging of two batteries. An integrated USB
Type-C connector supports mains power via an included
power supply or from common external USB battery banks
(sold separately). Front-facing LEDs indicate status and
capacity when charging, or users can use the Battery Charg-
ing Hub to check battery levels simply by inserting a battery
and pressing a single button.
To Next Page
Loading...
