Hasselblad X1D II 50C - Error Messages

X1D II 50C USER GUIDE www.hasselblad.com
142
APPENDIX
Contents
8.2 ERROR MESSAGES
If any error message is displayed
1 Remove the components from the camera.
2 Attach the components to the camera
again.
If the error message is still displayed
1 Remove the battery.
2 Wait 10 seconds.
3 Attach the battery again.
The Camera processor is now reset.
If the error message is still displayed
1 Write down the error message.
2 Contact your closest authorized Hasselblad
dealer.