A
B
C
D
E
F
G
H
I
X1D II 50C USER GUIDE www.hasselblad.com
71
FUNCTIONS
Contents
LIVE VIEW OVERLAYS
1 The Camera displays Live View when you half-press
Shutter Release Button.
2 Press the Rectangle Button
(B)
to step to the next overlay.
3 Press button
A
, or
E
, to Exit Live View.
Note!
If you activate the EVF (Electronic Viewnder) by approaching
the EVF with your eye and start looking into it, the Live View
function for the Touch Display will turn off the Touch Display
(to save battery) with the help of a proximity sensor to the
right of the EVF display. If you switch back again and look at
the Touch Display, the EVF is turned off and the Touch Display
is activated.
Live View Settings
Overlay
Select Overlay displayed during Live View. Scroll between
options with button (B).
- Exposure information
(F)
.
- Exposure information + Grid
(G)
.
- Exposure information + Spirit Level
(H)
.
See chapter Spirit Level on page 118 for details.
- None
(I)
.
ZOOMING IN LIVE VIEW
1 Double tap the Touch Display, or press the Star Button
(C)
to Zoom in to 50% or 100% to that specic area.
Magnication factor is set in the
Camera Settings > Focus
menu. Note that when using the EVF you must press the
Star Button to zoom in.
2 Double tap or press on the Star Button again to Zoom out
to display the entire Capture.
3 You can pan the image when zoomed in by swiping.
If using the EVF you can pan the image by swiping the
Touch Display.
Note!
Live View demands higher power consumption than normal
operation. Working with Live View will shorten the usage time
of the Camera.