〉
【Transparency】
In the 3D view mode, you can touch the transparency button to switch the car model
transparency.
When the vehicle model transparency is selected as 100%, the vehicle bottom trans-
parency function will be activated.
After the vehicle bottom transparency function is activated, the image interface will
gradually display the image of the road under the vehicle as the vehicle moves.
〉
【Intelligent view】
You can activate or deactivate the intelligent view switch function. After the function is
activated:
When the vehicle is in gear D, if the front radar detects an obstacle less than or equal
to 1m from the vehicle body, it will automatically switch to the front top image.
When the vehicle is in gear R, if the rear radar detects an obstacle less than or equal to
1m from the vehicle body, it will automatically switch to the rear top image.
It will automatically switch to the previous image after the obstruction is removed.
〉
【Auxiliary view】
Touch the button to switch between the default view (with the auxiliary view function
off),
(wheel view), and wide-angle view.
〉
【Moving object detection】
You can activate or deactivate the moving object detection function. After the function is
enabled, when a moving object such as a pedestrian is detected, the image interface
will display an alarm message.
〉
【Washing station】
Touch the button to enable or disable the washing station mode. After the washing sta-
tion mode is enabled, the tire track will be displayed and it can assist the driver to drive
in and out of the washing station.
〉
【Parking assist】
Touch the parking assist button to enable the fully automatic integrated parking system.
(▷ Page 114)
〉
【Reversing assist】
Touch the reversing assist button to enable the reversing assist function.(▷ Page 117)
View switch
Automatic view switch
113
2
Driving
To Next Page
Loading...
