HBM QuantumX - Layout with Data Recorder CX22 B-W; Output Measurement Signals to CAN Bus (MX840 B)

Connecting individual QuantumX modules
QuantumX A03031_24_E00_01 HBM: public 69
7.2.7 Layout with data recorder CX22B‐W
FireWire connection
10 V ... 30 V DC (NTX001, etc.)
Connection via Ethernet cable or
wireless (WLAN)
CX22B-W
Fig. 7.7 Layout with CX22‐W
7.2.8 Output measurement signals to CAN bus (MX840B)
The MX840B amplifier allows channels 28 to output to the CANbus (chan
nel 1). This mode is configured entirely in the MX Assistant.
Fig. 7.8 Output to CAN bus (MX840A, connection 1)