Modules and transducers
100 A03031_24_E00_01 HBM: public QuantumX
Standard Thermo-Mini or 1-THERMO-
MINI from HBM with integrated RFID
chip (wireless TEDS)
8.8.1 Thermocouple with TEDS functionality (RFID)
Measuring point identification
An RFID
1)
chip in or on the thermocouple plug ensures wireless transducer
identification through the amplifier. RFID technology enables non-contact
reading and writing of data such as measuring point designation, sensor type,
physical unit (°C or °F) or thermal calibration data. The data is written to the
RFID via the HBM software. The data is read and written via the RFID
transponder built into the module.
The chip is reusable and works without batteries.
Rescaling
In addition to the IEC-based characteristic, all channels offer the option of
table-based rescaling, which converts values from degrees to degrees.
Rescaling can be carried out via the sensor database or by the sensor
(RFID = TEDS).
The MX1609/ can process a maximum of 64 value pairs. In the TEDS
"Calibration Table" template 14 value pairs can be stored, provided no
additional optional templates are used.
1)
RFID = Radio Frequency Identification: Method for communication between transponder
and read/write device with magnetic fields or electromagnetic waves
To Next Page
Loading...
