QuantumX A03031_24_E00_01 HBM: public 3
English
1 Safety instructions 8........................................
2 Electro magnetic conformity 14...............................
3 Markings used 16............................................
3.1 The markings used in this document 16..........................
3.2 Symbols on the device 17......................................
4 Introduction 20..............................................
4.1 About the QuantumX documentation 20.........................
4.2 The QuantumX family 21......................................
4.3 Module overview/transducer technologies 25.....................
4.4 Digitalization and signal path 26................................
4.5 Synchronization 27............................................
5 Software 34.................................................
5.1 MX Assistant 34..............................................
5.2 catman®AP 35...............................................
5.3 LabVIEW® driver / library 37...................................
5.4 Driver and API for Microsoft® Visual Studio .NET 37..............
5.5 Other drivers 38..............................................
5.6 Firmware update via Ethernet 38................................
6 Mechanical 39...............................................
6.1 Mounting case clips on modules 40.............................
6.2 Connecting housings 43.......................................
6.3 Mounting the housing with CASEFIT 45..........................
6.4 BPX001/BPX002/BPX003 backplane 45.........................
6.4.1 Connection 47................................................
6.4.2 Backplane BPX001 48.........................................
6.4.3 Backplane BPX002 49.........................................
6.4.4 BPX003 backplane 50.........................................
6.4.5 Mounting the modules 50......................................
6.4.6 Backplane with Ethernet connection 53..........................
To Next Page
Loading...
