Modules and transducers
QuantumX A03031_24_E00_01 HBM: public 87
See pageConnection socketsTransducer type
Inductive full bridge 1 ... 4 117
Inductive half bridge 1 ... 4 122
Electrical voltage 1 ... 4 130, 131
High-voltage via adapter (300 V
CAT II)
1 ... 4 133
Electrical current 1 ... 4 134
Current-fed piezoelectric trans
ducer (IEPE, ICP®)
1 ... 4 128
Piezoresistive transducer 1 ... 4 118
8.4.1 MX410B pin assignment
So that insertion or removal of a transducer connection can be unmistakably
identified, Pin 4 and Pin 9 in the connector plug must be bridged! If this bridge
is missing, no measurement values will be recorded at the connection!
To Next Page
Loading...
