Application
WTX110 A4774-1.0 HBM: public 113
→ If Count selected
Output 1 Assignment of digital output 0
None, N<S1, N>S1, N in S1/S2, N out S1/S2
Output 2 Assignment of digital output 1
None, N<S2, N>S2, N in S1/S2, N out S1/S2
→ If Filler selected
Start via keyb Start filling process via device key F5 (Start)
Rec. weight Off No weight memory
Keyboard Automat. Weight memory after
acknowledgment via device key F5
(Weighing)
Extern Automat. Weight memory after
acknowledgment via digital input/
Ethernet
Information
After the change to Application (Standard, Filler, Count, Check) the
device must be restarted.
To Next Page
Loading...