Need help?Do you have a question about the HBM WTX110 and is the answer not in the manual?
General| Brand | HBM |
|---|---|
| Model | WTX110 |
| Category | Touch terminals |
| Language | English |
Defines the device's specific applications and limits for proper operation.
Specifies environmental limits and operational requirements for the device.
Outlines the necessary qualifications for operating personnel.
Details essential safety practices for device operation.
Lists further safety measures for risk mitigation.
Highlights potential hazards from improper installation or operation.
Explains symbols and their meanings used in the manual.
Describes symbols and labels present on the WTX110 device.
Provides a general description of the WTX110 weighing terminal.
Lists available hardware configurations and optional modules.
Details the various connection types and terminals for the device.
Explains connections for analog SG sensors via the ADM module.
Covers RS232 and RS485 serial interface connections.
Describes connections for digital I/O modules.
Details the configuration and connection of the analog output.
Outlines procedures for device setup and physical mounting.
Provides instructions for connecting the device to the mains power supply.
Explains the correct procedure for assembling cables.
Guides the connection of analog strain gauge sensors.
Details how to connect serial interfaces like RS232/RS485.
Describes how to connect the device via USB.
Explains how to establish an Ethernet network connection.
Covers the setup of digital I/O configurations (IO and DIO).
Explains how to power external devices from the WTX110.
Covers connections for 110-240 VAC and 12-30 VDC power.
Describes the function and setup of legal for trade memory (ALI).
Explains how to configure the device's On/Off key function.
Details how to access Service Mode using the default password.
Identifies and explains the components of the WTX110 display and controls.
Demonstrates operator input sequences for various data types.
Shows how to input text strings using the device keys.
Illustrates the process of entering numerical values.
Explains how to input numbers with decimal places.
Describes how to perform basic weighing operations.
Explains various methods for taring the scale.
Details how to set the scale to zero.
Guides the setup of communication interfaces like Ethernet and Serial.
Configures the Ethernet port settings for data transfer.
Configures serial ports (Com1, Com6) for communication.
Allows adjustment of general device parameters like language and time.
Covers settings for scale, digital I/Os, and analog outputs.
Sets up the scale driver and parameters.
Configures digital input and output behavior.
Sets up analog output signals.
Performs diagnostic tests on device hardware interfaces.
Performs diagnostic tests on digital interfaces.
Performs diagnostic tests on serial interfaces.
Resets service mode parameters to factory defaults.
Clears the legal for trade weight memory.
Configures network parameters like IP address and gateway.
Manages device configuration backup and restore via USB.
Describes the basic weighing mode for simple applications.
Details functions for filling and dosing control.
Explains the mode for counting items by weight.
Provides practical examples for using the COUNT mode.
Guides counting items into an empty container.
Guides counting items from a pre-filled container.
Describes the checkweighing mode for classifying weights.
Illustrates scenarios for using the CHECK mode.
Selects the primary application mode (Standard, Filler, Count, Check).
Configures up to four adjustable limit switches for output control.
Explains modes like Above Level, Below Level, Outside/Inside Band.
Sets up digital inputs and outputs based on the application.
Configures digital I/Os for the Standard application mode.
Configures digital I/Os for the Filler application mode.
Customizes printouts by adjusting variables and texts.
Details default print format settings.
Resets all device settings to their factory default values.
Details how to enter Mastermode for advanced filter adjustments.
Manages general settings like date, time, and language.
Sets up parameters for different products, including dosing and alarms.
Manages product data sets using a USB connection.
Configures dosing parameters like upward/downward flow and valve control.
Adjusts process parameters for optimal dosing accuracy.
Configures re-dosing and tolerance limits for precise results.
Sets up alarms for various process conditions.
Manages weighing data, including display and reset of legal memory.
Configures network settings like IP address and terminal number.
Configures the scale for multiple weighing ranges.
Sets up the scale with two or three different weighing ranges.
Adjusts parameters to optimize weighing results based on environment.
Sets geo values for location-specific calibration compensation.
Configures settings required for legal for trade scales.
Navigates through calibration parameter groups.
Configures weighing ranges, scale intervals, and units.
Details the procedure for calibrating the scale.
Compensates for scale characteristic variations using correction points.
Sets up correction points for scale linearization.
Redefines the scale's zero point, particularly after frame removal.
Adjusts parameters like motion window and filter size for adaptation.
Configures the optical tilt sensor for incline compensation.
Sets parameters for the optical tilt sensor, including port and max angle.
Calibrates the optical tilt sensor for accurate measurements.
Applies linearization to the optical tilt sensor data.
Displays weight values with linearization applied.
Resets incline sensor settings and calibration data.
Enables display of weight values at 10 times higher resolution.
Resets A/D converter parameters to default values.
Calculates the span based on load cell sensitivity.
Checks scale parameters against weights and measures legislation.
Defines the protocol used for transferring data sets.
Describes the fixed format for remote indication data sets.
Explains how to configure data sets for free configuration.
Provides instructions for safe shipping and storage of the device.
Suggests regular visual inspections and checks for upkeep.
Details safe methods and cautions for cleaning the device.
Provides instructions for safely replacing the internal battery.
Information on environmental compliance for hazardous substances.
Accesses the scale error log for diagnostic information.
Lists common error messages, their causes, and solutions.
To Next Page