HBM WTX110 - Markings on Device; System Description

Markings used
WTX110 A4774-1.0 HBM: public 15
2.2 Markings used on the device
Electrical shock
Disconnect the power plug before opening the housing.
This applies to variants with power supply
110 … 240 V
AC
.
Note supply voltage
This symbol indicates that the supply voltage must be
between 12 and 30V
DC
. This applies to variants with
12…30 V
DC
power supply.
CE mark
With the CE mark, the manufacturer guarantees that the
product complies with the requirements of the relevant
EC Directives (the Declaration of Conformity can be
found on the HBM website HBM (www.hbm.com) under
HBMdoc).
Statutory waste disposal mark
In accordance with national and local environmental
protection and material recovery and recycling regula
tions, old devices that can no longer be used must be
disposed of separately and not with normal household
garbage.
Battery disposal
In accordance with national and local environmental pro
tection and material recovery and recycling regulations,
old batteries that can no longer be used must be
disposed of separately and not with normal household
garbage.