Installation
54 A4774-1.0 HBM: public WTX110
4.18 Activating the On/Off key
Fig. 4.13 Switches S100
Switch S100 on the WTX110 motherboard is used to configure the function of
the On/Off key (F1):
ON position (default) On/Off key deactivated
The weighing terminal starts immediately as soon as current
is supplied.
Position 1 On/Off key activated
The weighing terminal does not start until the On/Off key is
activated. Activating the key again turns the weighing
terminal off.
About 1 minute is required to start the device. The device shows the text:
System Startup ...
Please wait!
To Next Page
Loading...