Calibration
160 A4774-1.0 HBM: public WTX110
The multi-range weighing machine automatically switches from the lower range
to the next higher range when under load.
When a tared scale (net weighing) is zeroed, no automatic switch is made to
the lower digit, and the tare is not deleted. To switch back to the low digit, the
tare must first be deleted with the Tare key. Automatic switching is only carried
out on a scale that has not been tared (gross weighing).
Example of a weight characteristic over time and the displayed scale interval:
Fig. 11.1 Example of a multi-range weighing machine
To Next Page
Loading...