HBM WTX110 - Page 88

Service mode
86 A4774-1.0 HBM: public WTX110
ValueValueGroup in Service mode
General Language: German Tare mode: Gross/Net
Date: DD.MM.YY Cont.out Off
Time: HH:MM Light Off (Min.) 0
Decimal char.: Dot Power Off (Min.) 0
Approval signs: N Power supply: line
Config. Scale Scale 1: ADM Scale 2: None
Config. Digital IO Group 1: PIM Group 2: None
Config. Analog out AOut 1: None
Information
The analog output (Config Analog out) must always be reconfigured after
resetting. This is set in Service mode/Interface/Config Scale/Config.Analog
out.