HellermannTyton TT431 - English; Default Chapter; Table of Contents

Operating Instructions • Thermal transfer printer TT431 • 03-2019 • 556-00400 3
GBDEFRESPTITNLDKNESEFIPLCZHUSIROTR
Operating instructions
Table of contents
1 User information .................... 4
1.1 Field of application .................. 4
1.2 Used labels and symbols .............. 4
1.3 Safekeeping of documents and
actuality .......................... 4
1.4 Intended use ...................... 4
1.5 EC conformity .....................4
1.6 Applicable documents ............... 4
1.7 Customer service and spare parts ....... 4
2 Safety instructions ................... 5
2.1 Representation and layout of warning
instructions ....................... 5
2.2 Danger grading of warning
instructions ....................... 5
2.3 Basic safety instructions .............. 5
2.4 Limitations of use ................... 5
2.5 Operator obligations ................ 5
3 Transport and storage ................ 5
4 Layout and function .................. 6
4.1 Layout ........................... 6
4.2 Touchscreen display ................. 7
4.2.1 Start screen ....................... 7
4.2.2 Navigation in the menu .............. 8
5 Initial operation .................... 10
5.1 Device placement .................. 10
5.2 Connecting the device to the
power supply ..................... 10
5.3 Connecting the device to a computer
or computer network ............... 11
5.4 Switching the device on and off ....... 11
6 Operation ......................... 11
6.1 Inserting the roll material ............ 11
6.1.1 Adjusting the light barrier ............ 12
6.2 Inserting the colour ribbon ........... 13
6.3 Adjusting the colour ribbon feed ...... 14
7 Print mode ........................ 14
7.1 Cutting mode ..................... 14
7.2 Tear-off mode .................... 14
8 Troubleshooting .................... 15
8.1 Error displays ..................... 15
8.2 Error messages and troubleshooting .... 16
8.3 Problem solving ................... 17
9 Maintenance ...................... 18
9.1 Preparation and follow-up tasks ....... 18
9.2 Maintenance and cleaning ........... 18
9.2.1 Regular maintenance work ........... 18
9.2.2 Cleaning agents and materials ........ 18
9.2.3 Cleaning the device ................ 18
9.2.4 Cleaning the print roller ............. 19
9.2.5 Cleaning the printhead .............. 19
10 Taking out of operation .............. 20
10.1 Taking the device out of operation ..... 20
10.2 Putting the device back into
operation ........................ 20
11 Disposal .......................... 20
12 Technical data ..................... 20
12.1 Device dimensions ................. 21
12.2 Sections/continuous material
dimensions ....................... 22
12.3 Dimensions for reflection marks ....... 23
12.4 Dimensions for perforations .......... 24