Hioki PW3335 - Displaying Maximum, and Minimum Values (MAX;MIN); Switching the Display Among the Maximum, Minimum, and Instanta- Neous Values

3.9 Other Functions
107
The instrument continuously measures instantaneous, maximum, and minimum values. The display can be
switched to these values with the key.
• The maximum value (including waveform peak value) for each measurement parameter is detected and
held on the display. (maximum value hold).
• The minimum value (including waveform peak value) for each measurement parameter is detected and
held on the display. (minimum value hold).
Switching the display among the maximum, minimum, and instanta-
neous values
3.9.2 Displaying Maximum, and Minimum Values
(MAX/MIN)
1 Press to place the instrument
in the shift state.
2 Press .
The MAX lamp will turn on, and the display will
switch to the maximum value display.
3 Press again.
The MIN lamp will turn on, the display will switch
to the minimum value display.
4 Press again.
The MIN lamp will turn off, return to the in-
stantaneous value display.
To display the maximum value again, repeat
the process from step 1.
1