Confirming Package Contents
2
When you receive the instrument, inspect it carefully to ensure that no damage occurred during shipping. In
particular, check the accessories, panel switches, keys, and connectors. If damage is evident, or if it fails to
operate according to the specifications, contact your authorized Hioki distributor or reseller.
Store the packaging in which the instrument was delivered, as you will need it when transporting the instru-
ment.
Instrument and accessories
Confirm that these contents are provided.
Options (sold separately)
The following options are available for the instrument. Contact your authorized Hioki distributor or reseller
when ordering.
Communications and control options
Model 9637 RS-232C Cable (9pin-9pin/ 1.8 m, crossover cable)
Model 9638 RS-232C Cable (9pin-25pin/ 1.8 m, crossover cable)
Model 9642 LAN Cable(5 m, Supplied with Cross-Over Adapter)
Model 9151-02 GP-IB Connector Cable (2 m)
Model 9165 Connection Cord (1.5 m, metal BNC to metal BNC, not CE marked, for the synchronized
measurements)
Current sensor options
Model 9661 Clamp on Sensor (500 A AC)
Model 9669 Clamp on Sensor (1000 A AC)
Model 9660 Clamp on Sensor (100 A AC)
Model CT9667 Flexible Clamp on Sensor (500 A/5000 A AC)
Model 9555-10 Sensor Unit
Model L9217 Connection Cord
Model 9272-10 Clamp on Sensor (20 A/200 A AC)
Model 9277 Universal Clamp on CT (20 A AC/DC)
Model 9278 Universal Clamp on CT (200 A AC/DC)
Model 9279 Universal Clamp on CT (500 A AC/DC)
Model 9709 AC/DC Current Sensor (500 A AC/DC)
Model CT6862 AC/DC Current Sensor (50 A AC/DC)
Model CT6863 AC/DC Current Sensor (200 A AC/DC)
Model CT6865 AC/DC Current Sensor (1000 A AC/DC)
Model CT6841 AC/DC Current Probe (20 A AC/DC)
Model CT6843 AC/DC Current Probe (200 A AC/DC)
Confirming Package Contents
PW3335, PW3335-01, PW3335-02, PW3335-03,
PW3335-04 Power Meter
Instruction manual
Power cord
Voltage and current input terminal safety cover ×2
Safety cover installation screws (M3×6 mm) ×4
Example: PW3335
To Next Page
Loading...
