Hioki PW3335 - Setting the VT Ratio

3.2 Configuring Settings
59
Setting the VT ratio
1 Press .
2 Press to switch to the VT ratio
settings screen. ([vt.] will be displayed
in display area
a.)
3 Press or until the digit you wish
to set in display area
a, which will start
flashing.
4 Press or to set the VT ratio.
To move the decimal point:
Press or until the decimal point
flashes, and press or .
Default setting: 1.0
Setting range:
See:
"VT ratio setting range" (p.58)
5 Press to exit the settings.
The instrument will return to the normal display (Mea-
surement screen).