Hioki PW3335 - Connecting a TYPE.1 Current Sensor; Connecting a TYPE.2 Current Sensor

3.8 Using a Current Sensor
102
Connecting a TYPE.1 current sensor
Connect the current sensor directly to one of the instrument’s external current sensor input terminal.
Connecting a TYPE.2 current sensor
Use the 9555-10 Sensor Unit and L9217 Connection Cord to input current sensor output to the instrument.
1
Connect the current sensor’s BNC connector to a external current sensor input termi-
nal. Align the groove on the BNC connector with the connector guides on the instru-
ment and insert.
2
Turn clockwise to lock.
External current sensor input terminal
Connector guides on the
instrument’s external cur-
rent sensor input terminal
Connector groove on
the current sensor
Lock
To remove the connector, turn it counterclock-
wise to disengage the lock and then pull out.
Power supply Load
(Example connection)
L9217 Connection Cord
Current sensor
9555-10 Sensor Unit
External current sensor input terminal
4
3
5
1,6
1,6
2,8