Hioki PW3335 - Setting the Lans IP Address

4.1 Configuring and Connecting the Instrument
117
Setting the LAN’s IP address
Before using the LAN, set the LAN’s IP address.
1 Press .
2 Press to switch to the LAN’s IP
address settings screen. ([iP] will be
displayed in display area
b.)
3 Press or until the digit you
wish to set in the display area
c or d,
which will start flashing.
4 Press or to set the IP
address.
Setting range: 000 to 255
5 Press to exit the settings.
The screen shown to the left will be displayed while
the LAN is initialized.
The instrument will return to the normal display (Mea-
surement screen).