4.1 Configuring and Connecting the Instrument
119
Setting the LAN’s default gateway
Before using the LAN, set the LAN’s default gateway.
2 Press to switch to the LAN’s sub-
net mask settings screen. ([GAtE] will
be displayed in display area
b.)
3 Press or until the digit you
wish to set in the display area
c or d,
which will start flashing.
4 Press or to set the default
gateway.
Setting range: 000 to 255
5 Press to exit the settings.
The screen shown to the left will be displayed while
the LAN is initialized.
The instrument will return to the normal display (Mea-
surement screen).
To Next Page
Loading...
