4.1 Configuring and Connecting the Instrument
129
Setting the GP-IB address
Before using the GP-IB interface, you must set the GP-IB address.
2 Press to switch to the GP-IB
address settings screen. ([GPib.] will be
displayed in display area
c.)
3 Press or until the display area
d flashes.
4 Press or to set the GP-IB
address.
Default setting: 1
Setting range: 0 to 30
5 Press to exit the settings.
The instrument will return to the normal display (Mea-
surement screen).
To Next Page
Loading...
