EasyManua.ls Logo

Hioki PW3335 - Output Voltage of Waveform Output

Hioki PW3335
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.7 Using D/A Output
99
Output voltage of waveform output
For sine wave input with an RMS value of 150 V
at 50 Hz in the 150 V range
Input
voltage
Voltage and current phase difference: 0°
Instantaneous voltage waveform output
Output of voltage with an RMS value of 1 V
and a frequency of 50 Hz
For sine wave input with an RMS value of 1 A
at 50 Hz in the 1 A range
Input
current
Voltage and current phase difference: 0°
Instantaneous current waveform output
Output of voltage with an RMS value of 1 V
and a frequency of 50 Hz
For input of 150 W at 50 Hz with a power factor of 1
in the 150 W range
Input
power
The instantaneous power varies at 100 Hz (50 Hz × 2)
when the average value is 150 W.
Instantaneous power waveform output
Outputs the voltage that varies at 100 Hz
with an average value of 1 V.

Table of Contents

Related product manuals