3.3 Integration
67
Enabling auto-range integration
2 Press to switch to the current
input settings screen. ([
i.AUto] will be
displayed in display area
c.)
3 Press or until the display area
d flashes.
4 Press or to set ON (enable)
or OFF (disable).
Default setting: OFF
Setting range:
oFF → on → oFF ⋅⋅⋅
(Once auto-range integration has been enabled, the
AUTO lamp to the left of will light up.
If the current input method is set to TYPE.1 or TYPE.2, the AUTO lamp will not light up, and auto-range inte-
gration mode will not function.
5 Press to exit the settings.
The instrument will return to the normal display (Mea-
surement screen).
To Next Page
Loading...
