Hioki PW3335 - Setting the Lans Subnet Mask

4.1 Configuring and Connecting the Instrument
118
Setting the LAN’s subnet mask
Before using the LAN, set the LAN’s subnet mask.
1 Press .
2 Press to switch to the LAN’s sub-
net mask settings screen. ([SUbnEt] will
be displayed in display area
b.)
3 Press or until the digit you
wish to set in the display area
c or d,
which will start flashing.
4 Press or to set the subnet
mask.
Setting range: 000 to 255
5 Press to exit the settings.
The screen shown to the left will be displayed while
the LAN is initialized.
The instrument will return to the normal display (Mea-
surement screen).