Hioki PW3335 - Setting the Zero-Cross Filters Threshold Level

3.2 Configuring Settings
53
Setting the zero-cross filter’s threshold level
1 Press .
2 Press to switch to the zero-cross
filter’s threshold level settings screen.
([rAnGE] will be displayed in display
area
a.)
3 Press or until the display area
b flashes.
4 Press or to display the
range to set (it will flash).
5 Press or until the display area
d flashes.
6 Press or to set the zero-
cross filter’s threshold level (%).
Default setting: 1
Settings:
1 to 15
(Setting any of the zero-cross filter threshold levels to
a value other than the default value will cause the
RANGE SEL lamp to light up.)
7 Press to exit the settings.
The instrument will return to the normal display (Mea-
surement screen).