Removal and Installation
8-46
HP DesignJets 1050C and 1055CM Printers Service Manual
NOTE For steps 6 to 8, refer to Figure 43.
6. Unclip and remove the trailing cable restraining clip (item 2) from
the Carriage Assembly (item 1).
7. Carefully disconnect the trailing cable (item 3) from connectors in
the Carriage PCA (item 4).
8. Remove the trailing cable (item 3) from the trailing cable holder
(item 5).
Figure 43: Carriage Assembly and Belt
1
2
3
4
5
C607412
To Next Page
Loading...
