HP HPE FlexNetwork 7500 series

213
Configuring a BGP peer
Configuring a BGP peer (IPv4 unicast address family)
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Create an IPv4 BGP peer
and specify its AS number.
peer
ipv4-address
as-number
as-number
By default, no IPv4 BGP peers
exist.
4. (Optional.) Configure a
description for a peer.
peer
ipv4-address
description
text
By default, no description is
configured for a peer.
5. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
address-family ipv4
[
unicast
]
By default, no BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family exists.
6. Enable the router to
exchange IPv4 unicast
routing information with the
specified peer.
peer
ipv4-address
enable
By default, the router cannot
exchange IPv4 unicast routing
information with the peer.
Configuring a BGP peer (IPv6 unicast address family)
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Create an IPv6 BGP peer
and specify its AS number.
peer
ipv6-address
as-number
as-number
By default, no IPv6 BGP peers
exist.
4. (Optional.) Configure a
description for a peer.
peer
ipv6-address
description
text
By default, no description is
configured for a peer.
5. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
address-family ipv6
[
unicast
]
By default, no BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family exists.