HP HPE FlexNetwork 7500 series

231
Step
Command
Remarks
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
• Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
N/A
3. Enable route redistribution
from the specified IGP into
BGP.
import-route
protocol
[ { process-id |
all-processes
}
[
allow-direct
|
med
med-value |
route-policy
route-policy-name ]
* ]
By default, BGP does not
redistribute IGP routes.
4. (Optional.) Enable default
route redistribution into BGP.
default-route imported
By default, BGP does not
redistribute default routes.
To configure BGP to redistribute IGP routes (IPv6 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A