HP HPE FlexNetwork 7500 series User Manual

237
Step
Command
Remarks
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
• Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
N/A
3. Advertise a default route to a
peer or peer group.
peer
{ group-name | ipv4-address
[ mask-length ] }
default-route-advertise
[
route-policy
route-policy-name ]
By default, no default route is
advertised.
To advertise a default route to a peer or peer group (IPv6 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A

HP HPE FlexNetwork 7500 series Specifications

General

Brand	HP
Model	HPE FlexNetwork 7500 series
Category	Switch
Language	English