246
1. Enter system view.
system-view
N/A
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number [ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number [ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast address
family view:
f. bgp as-number [ instance
instance-name ]
g. address-family ipv4
N/A
3. Configure BGP route
reception filtering policies.
• Reference an ACL or IP prefix list
to filter BGP routes received from
all peers:
filter-policy { ipv4-acl-number |
prefix-list prefix-list-name }
import
• Reference a routing policy to filter
BGP routes received from a peer
or peer group:
peer { group-name | ipv4-address
[ mask-length ] } route-policy
route-policy-name import
• Reference an ACL to filter BGP
routes received from a peer or
peer group:
peer { group-name | ipv4-address
[ mask-length ] } filter-policy
ipv4-acl-number import
• Reference an AS path list to filter
BGP routes received from a peer
or peer group:
peer { group-name | ipv4-address
[ mask-length ] } as-path-acl
as-path-acl-number import
• Reference an IPv4 prefix list to
filter BGP routes received from a
peer or peer group:
peer { group-name | ipv4-address
[ mask-length ] } prefix-list
prefix-list-name import
Use at least one method.
By default, no route
reception filtering is
configured.
To configure BGP route reception filtering policies (IPv6 unicast/multicast address family):
1. Enter system view.
N/A
To Next Page
Loading...
