HP HPE FlexNetwork 7500 series

250
Step
Command
Remarks
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
• Enter BGP IPv4 unicast
address family view:
a. bgp as-number [ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number [ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number [ instance
instance-name ]
g. address-family ipv4
multicast
N/A
3. Configure BGP route
dampening.
dampening
[ half-life-reachable
half-life-unreachable reuse
suppress ceiling |
route-policy
route-policy-name ] *
By default, BGP route
dampening is not configured.
To configure BGP route dampening (IPv6 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP IPv6 unicast
address family view,
BGP-VPN IPv6 unicast
address family view, or BGP
IPv6 multicast address family
view.
• Enter BGP IPv6 unicast
address family view:
a. bgp as-number [ instance
instance-name ]
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number [ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number [ instance
instance-name ]
g. address-family ipv6
multicast
N/A
3. Configure IPv6 BGP route
dampening.
dampening
[ half-life-reachable
half-life-unreachable reuse
suppress ceiling |
route-policy
route-policy-name ] *
By default, IPv6 BGP route
dampening is not configured.