HP HPE FlexNetwork 7500 series

253
Step
Command
Remarks
2. Enter BGP IPv4 unicast
address family view,
BGP-VPN IPv4 unicast
address family view, or BGP
IPv4 multicast address family
view.
• Enter BGP IPv4 unicast
address family view:
a. bgp as-number
[ instance
instance-name ]
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
[ instance
instance-name ]
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
[ instance
instance-name ]
g. address-family ipv4
multicast
N/A
3. Configure preferences for
EBGP, IBGP, and local BGP
routes.
preference
{ external-preference
internal-preference
local-preference |
route-policy
route-policy-name }
The default preferences for
EBGP, IBGP, and local BGP
routes are 255, 255, and 130.
4. Configure an EBGP route as
a shortcut route.
network
ipv4-address
[ mask-length | mask ]
short-cut
By default, an EBGP route has a
preference of 255.
To configure preferences for BGP routes (IPv6 unicast/multicast address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A