HP HPE FlexNetwork 7500 series User Manual

289
Step
Command
Remarks
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A
3. Enable BGP route refresh for
a peer or peer group.
• Enable BGP route refresh for
the specified peer or peer
group:
peer { group-name |
ipv6-address
[ prefix-length ] }
capability-advertise
route-refresh
• Enable the BGP route
refresh, multi-protocol
extension, and 4-byte AS
number features for the
specified peer or peer group:
undo peer { group-name |
ipv6-address
[ prefix-length ] }
capability-advertise
conventional
By default, the BGP route refresh,
multi-protocol extension, and
4-byte AS number features are
enabled.
4. Return to user view.
return
N/A
5. Perform manual soft-reset.
refresh bgp
[
instance
instance-name ] { ipv6-address
[ prefix-length ] |
all
|
external
|
group
group-name |
internal
}
{
export
|
import
}
ipv6
{
multicast
| [
unicast
]
[
vpn-instance
vpn-instance-name ] }
N/A
To configure manual soft-reset (LS address family):
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP instance view or
BGP-VPN instance view.
• Enter BGP instance view:
bgp as-number [ instance
instance-name ]
• Enter BGP-VPN instance
view:
a. bgp as-number
[ instance
instance-name ]
b. ip vpn-instance
vpn-instance-name
N/A

HP HPE FlexNetwork 7500 series Specifications

General

Brand	HP
Model	HPE FlexNetwork 7500 series
Category	Switch
Language	English