EasyManua.ls Logo

HP HPE FlexNetwork 7500 series

HP HPE FlexNetwork 7500 series
592 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
374
[SwitchD-bgp-default] peer 3002::1 as-number 200
[SwitchD-bgp-default] peer 2002::1 as-number 200
[SwitchD-bgp-default] address-family ipv6 unicast
[SwitchD-bgp-default-ipv6] peer 3002::1 enable
[SwitchD-bgp-default-ipv6] peer 2002::1 enable
[SwitchD-bgp-default-ipv6] network 4:: 64
[SwitchD-bgp-default-ipv6] quit
[SwitchD-bgp-default] quit
4. Configure preferred values so Link B is used to forward traffic between Switch A and Switch D:
# Configure Switch A to set the preferred value to 100 for routes received from Switch B.
[SwitchA-bgp-default-ipv6] peer 3001::2 preferred-value 100
[SwitchA-bgp-default-ipv6] quit
[SwitchA-bgp-default] quit
# Configure Switch D to set the preferred value to 100 for routes received from Switch B.
[SwitchD-bgp-default-ipv6] peer 3002::1 preferred-value 100
[SwitchD-bgp-default-ipv6] quit
[SwitchD-bgp-default] quit
5. Configure BGP FRR:
# On Switch A, create routing policy frr to set a backup next hop 2001::2 (Switch C) for the route
destined for 4::/64.
<SwitchA> system-view
[SwitchA] ipv6 prefix-list abc index 10 permit 4:: 64
[SwitchA] route-policy frr permit node 10
[SwitchA-route-policy] if-match ipv6 address prefix-list abc
[SwitchA-route-policy] apply ipv6 fast-reroute backup-nexthop 2001::2
[SwitchA-route-policy] quit
# Apply the routing policy to BGP FRR for BGP IPv6 unicast address family.
[SwitchA] bgp 100
[SwitchA-bgp-default] address-family ipv6 unicast
[SwitchA-bgp-default-ipv6] fast-reroute route-policy frr
[SwitchA-bgp-default-ipv6] quit
[SwitchA-bgp-default] quit
# On Switch D, create routing policy frr to set a backup next hop 2002::1 (Switch C) for the route
destined for 1::/64.
<SwitchD> system-view
[SwitchD] ipv6 prefix-list abc index 10 permit 1:: 64
[SwitchD] route-policy frr permit node 10
[SwitchD-route-policy] if-match ipv6 address prefix-list abc
[SwitchD-route-policy] apply ipv6 fast-reroute backup-nexthop 2002::1
[SwitchD-route-policy] quit
# Apply the routing policy to BGP FRR for BGP IPv6 unicast address family.
[SwitchD] bgp 200
[SwitchD-bgp-default] address-family ipv6 unicast
[SwitchD-bgp-default-ipv6] fast-reroute route-policy frr
[SwitchD-bgp-default-ipv6] quit
[SwitchD-bgp-default] quit

Table of Contents

Related product manuals