HP HPE FlexNetwork 7500 series User Manual

508
Step
Command
Remarks
5. Set the specified
COMMUNITY attribute for
BGP routes.
apply community
{
none
|
additive
|
{ community-number&<1-32> |
aa:nn&<1-32> |
internet
|
no-advertise
|
no-export
|
no-export-subconfed
}
*
[
additive
] }
By default, no community attribute is
set for BGP routes.
6. Set a cost for routes.
apply cost
[
+
|
-
] cost-value
By default, no cost is set for routes.
7. Set a cost type for routes.
apply cost-type
{
external
|
internal
|
type-1
|
type-2
}
By default, no cost type is set for
routes.
8. Set the extended community
attribute for BGP routes.
apply extcommunity
{
rt
route-target }&<1-32>
[
additive
]
By default, no extended community
attribute is set for BGP routes.
9. Set the next hop for routes.
• Set the next hop for IPv4
routes:
apply ip-address
next-hop ip-address
[ public | vpn-instance
vpn-instance-name ]
• Set the next hop for IPv6
routes:
apply ipv6 next-hop
ipv6-address
By default, no next hop is set for
IPv4 or IPv6 routes.
The
apply ip-address next-hop
and
apply ipv6 next-hop
commands do not apply to
redistributed IPv4 and IPv6 routes.
10. Set an IP precedence for
matching routes.
apply ip-precedence
{ value |
clear
}
By default, no IP precedence is set.
11. Redistribute routes to the
specified IS-IS level.
apply isis
{
level-1
|
level-1-2
|
level-2
}
By default, routes are not
redistributed into the specified IS-IS
level.
12. Set a local preference for BGP
routes.
apply local-preference
preference
By default, no local preference is set
for BGP routes.
13. Set MPLS labels.
apply mpls-label
By default, no MPLS label is set.
14. Set the ORIGIN attribute for
BGP routes.
apply origin
{
egp
as-number
|
igp
|
incomplete
}
By default, no ORIGIN attribute is
set for BGP routes.
15. Set a preference.
apply preference
preference
By default, no preference is set.
16. Set a preferred value for BGP
routes.
apply preferred-value
preferred-value
By default, no preferred value is set
for BGP routes.
17. Set a prefix priority.
apply prefix-priority
{
critical
|
high
|
medium
}
By default, no prefix priority is set,
which means the prefix priority is
low.
18. Set a local QoS ID for
matching routes.
apply qos-local-id
{ local-id-value |
clear
}
By default, no local QoS ID is set.
19. Set a tag value for IGP routes.
apply tag
tag-value
By default, no tag value is set for
IGP routes.
20. Set a traffic index for BGP
routes.
apply traffic-index
{ value |
clear
}
By default, no traffic index is set for
BGP routes.

HP HPE FlexNetwork 7500 series Specifications

General

Brand	HP
Model	HPE FlexNetwork 7500 series
Category	Switch
Language	English