HP HPE FlexNetwork 7500 series User Manual

571
displaying PBR, 384
displaying RIP, 42
displaying RIPng, 416
displaying routing policy, 509
displaying static routing, 14
enabling BGP, 212
enabling BGP 4-byte AS number suppression
(IPv4), 278
enabling BGP 4-byte AS number suppression
(IPv6), 278
enabling BGP load balancing (IPv4), 281
enabling BGP load balancing (IPv6), 281
enabling BGP MED route comparison
(confederation peers), 260
enabling BGP MED route comparison (diff
ASs), 258
enabling BGP MED route comparison
(per-AS), 258
enabling BGP ORF capabilities, 276
enabling BGP peer keychain authentication
(IPv4), 280
enabling BGP peer keychain authentication
(IPv6), 280
enabling BGP peer MD5 authentication (IPv4),
279
enabling BGP peer MD5 authentication (IPv6),
279
enabling BGP per-prefix label allocation, 293
enabling BGP route flapping logging (IPv4),
303
enabling BGP route flapping logging (IPv6),
303
enabling BGP route-refresh (IPv4), 285
enabling BGP route-refresh (IPv6), 285
enabling BGP session state change logging
(IPv4), 302
enabling BGP session state change logging
(IPv6), 302
enabling BGP SNMP notification, 302
enabling DCN, 516
enabling DCN automatic report, 517
enabling DCN LLDP frame ARP entry, 518
enabling EBGP direct connections upon link
failure, 276
enabling EBGP session establishment
(multiple hop)(IPv4), 275
enabling EBGP session establishment
(multiple hop)(IPv6), 275
enabling IPv6 BGP MED AS route comparison
(confederation peers), 260
enabling IPv6 IS-IS automatic link cost
calculation, 476
enabling IPv6 IS-IS FRR BFD, 481
enabling IPv6 IS-IS ISPF, 478
enabling IPv6 IS-IS MTR, 482
enabling IPv6 IS-IS prefix suppression, 478
enabling IS-IS,
143
enabling IS-IS automatic cost calculation, 145
enabling IS-IS FRR BFD (control packet mode),
167
enabling IS-IS FRR BFD (echo packet mode),
167
enabling IS-IS interface hello packet send, 152
enabling IS-IS ISPF, 159
enabling IS-IS LSP flash flooding, 154
enabling IS-IS LSP fragment extension, 154
enabling IS-IS neighbor state change logging,
159
enabling IS-IS PIC, 161
enabling IS-IS PIC BFD, 161
enabling IS-IS prefix suppression, 159
enabling OSPF, 73
enabling OSPF (interface), 74
enabling OSPF (network), 74
enabling OSPF ISPF, 93
enabling OSPF neighbor state change logging, 91
enabling OSPF PIC, 94
enabling OSPF RFC 1583 compatibility, 90
enabling OSPFv3, 429
enabling OSPFv3 neighbor state change logging,
440
enabling RIP, 27
enabling RIP FRR BFD, 42
enabling RIP NSR, 39
enabling RIP poison reverse, 34, 34
enabling RIP split horizon, 34
enabling RIP update source IP address check, 35
enabling RIPng FRR BFD, 415
enabling RIPv1 message zero field check, 35
enabling RIPv2 automatic route summarization,
30
enabling static routing FRR BFD echo packet
mode, 14
enabling the device to advertise OSPF link state
information to BGP, 103
enhancing IS-IS network security, 161
excluding interfaces in an OSPF area from the
base topology, 84
filtering OSPF outbound LSA (interface), 96
filtering OSPF outbound LSAs (specified
neighbor), 96
flushing BGP suboptimal route to RIB, 291
flushing route attribute information from RIB to
FIB, 5
generating BGP route, 228

HP HPE FlexNetwork 7500 series Specifications

General

Brand	HP
Model	HPE FlexNetwork 7500 series
Category	Switch
Language	English