HP HPE FlexNetwork 7500 series

72
Tasks at a glance
(Required.) Enabling OSPF
(Optional.) Configuring OSPF areas:
• Configuring a stub area
• Configuring an NSSA area
• Configuring a virtual link
(Optional.) Configuring OSPF network types:
• Configuring the broadcast network type for an interface
• Configuring the NBMA network type for an interface
• Configuring the P2MP network type for an interface
• Configuring the P2P network type for an interface
(Optional.) Configuring OSPF route control:
• Configuring OSPF route summarization
 Configuring route summarization on an ABR
 Configuring route summarization on an ASBR
• Configuring received OSPF route filtering
• Configuring Type-3 LSA filtering
• Setting an OSPF cost for an interface
• Setting the maximum number of ECMP routes
• Setting OSPF preference
• Configuring discard routes for summary networks
• Configuring OSPF route redistribution
 Redistributing routes from another routing protocol
 Redistributing a default route
 Configuring default parameters for redistributed routes
• Advertising a host route
• Excluding interfaces in an OSPF area from the base topology