If multiple system he alth conditions exist simultaneously (for example, two components are experiencing
problems and have a status of warning and error, respectively), the icon representing the most serious
status is displayed in the status banner.
Figure 63 Device status ico n in the sta tus b an ner
A device status icon can be one of four states:
Unknown—A component’s o perating condition is unknown. Contact HP Technical Support.
Normal—All components within the VLS are operating normally.
Warning—A component’s operating condition has degraded.
Error— A component has failed.
Navigation tree icon
An icon appears just to the left of objects in the navigation tree when an unknown, warning, or
error condition is present with a component. It also appears just to the left of the parent objects of that
component. For example, if the icon is displayed by Fibre Channel in the navigation tree, it will also be
displayed by its parent objects (for example: Node 0, Nodes, and Chassis).
Figure 64 Navigation tree icon
Notification alerts
If a VLS hardware component or an environm ental condition degrades or fails, the VLS generates a
notification aler t. Notification alerts are displayed on Command View VLS in the Notification pane and
on the Notification tab window. Click the View Details link to view the details of a notification alert.
Notification alerts are also E-mailed to the addresses you specify and sent as SNMP traps to the
management consoles you specify.
Figure 65 Notification al ert examp l es
100
Monitoring
To Next Page
Loading...
