Opening a Comma
nd View VLS session from a web browser
NOTE:
Before you can open a Command View VLS session, you must set the VLS network settings. See
Setting the network settings.
To open a Command View VLS session from a web browser:
1. Launch a web brow ser.
2. In the web browser URL box, enter:
https://<fully qualified name of the VLS>
NOTE:
Entering “http://<fully qualified name>” instead of the above URL
automatically redirects you to the secure “https://<fully qualified name>”
connection. All communications are over a secure connection.
3. If a Security Alert window opens and prompts you to accept the Secure Sockets Layer (SSL) certificate,
install the SSL certificate as described in Installing the SSL c er tificate into your web br owser.
The first time you open a Command View VLS session (and the first time you open a Command View
VLS session after changing the fully qualified name of the VLS), a Security Alert window opens and
prompts you to accept the Secure Sockets Layer (SSL) certificate.
Figure 24 Command View VLS login window
4. Enter ad
ministrator or user in the Username box. The username is case sensitive.
NOTE:
Logging
in as administrator gives you full privileges to all VLS functions available
throughCommandViewVLS.Logginginasausergivesyouonlyviewingandcartridge
management privileges.
5. Enter the appropriate password in the Password box for the username entered.
HP StorageWorks
53
To Next Page
Loading...
